![]() ![]() Once everything is up and running, turn on your device and connect to the network.Your router needs to connect to your modem, and this will also take a few minutes. This should last a few minutes, at least 5 minutes depending on your provider. Turn on your modem first because it has to establish a connection with your ISP (Internet Service Provider).After you’ve turned everything off, make sure you follow these three steps: To power cycle your network, you need to turn off all devices in the network, starting from the modem. If you’re still experiencing the same issue, try power-cycling the entire network just in case. When you open the app, follow the prompts to set up the router properly.Īfter you’ve finished setting up your Nighthawk router, everything should work just fine.Connect to that network on your smartphone and open Netgear’s app.Find the name of the network, SSID (Service Set Identifier), and the password below the SSID.Plug your router into an outlet and in a few moments, the Wi-Fi LED should turn on.Use the cable provided in the box to connect the router to the modem.After that, you need to follow these steps: Take the router out of the box and attach all the complementary parts to it. To properly set up Netgear’s Nighthawk router and avoid the “router not found” issues, you need to download the Nighthawk app first. Improper setup is one of the most common factors contributing to the issues we experience with our hardware. Now that you understand the common reasons your Nighthawk router is not found, we can discuss the fixes. When you enable it on one router, it disables the NAT (Network Address Translator) function, so the router just becomes a bridge between two devices. It’s the router’s Bridge mode.īridge mode lets two routers connect and share the same network. There’s one thing we can do with our Nighthawk router that the app doesn’t support, and that’s something we should think about before trying to use the app to set something up. So, you might need to check that before doing anything else. If your device’s network driver is outdated, the adapter might not register some networks. The issue might be an outdated network device driver. This is sometimes the number one reason your Nighthawk router is not found. Check to see if you’re connected to a different Wi-Fi network, and make sure that your data is turned off if you’re using a smartphone. ![]() There might be something wrong with your connection. Sometimes, you might need to downgrade your router’s firmware. You might need to update your router’s firmware. If it’s not that, then there might be a firmware issue. You just need to press the Wi-Fi button on the router and see whether the LED turns on. At least it’s easy to fix with the Nighthawk router. Disabled Wi-Fi is causing the “Router Not Found” issue. Usually, we skip checking whether the Wi-Fi is disabled or not. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |